truespped controler not working

[docdoom]

had  few of the draww guys over for racing and could not get one of there true speed controlers to work with rsc64. would not ca; in any of the postions. turn of rsc64 and it would work with the power base.also still having problems with #2 throttle cals. known bug .

[martin]

In the current release there is a problem with ID2 for calibration, reset the calibration and use it without the calibration.

[docdoom]

we did that and still was a no go. what was strange is that the other true speed they had worked fine with my setup. also when you went into the  cal mode it would not see the brake and lane change at all. with the one we had problems with. was thinking after they left those true speed have adjustment for brakes and such. do you have to turn them to max before you do a cal?

[martin]

Just to make one thing clear RCS64 is not able to calibratate the buttons. it only interpolate if the controller cant give max or min throttle.

[docdoom]

then I'm not sure why it would not work. had no problems with the stock scaley ones and he said it works fine with is rsc64 set up...

[martin]

There might be other issues with the calibration, this will all be fixed in th upcomming release.
How is it react in the throttle tab

[docdoom]

it showed the throttle working. both in cal screen and race screen. but the car would not go. exit out of rsc64 and the car would work. restart rsc64 and it would stop.it just would not see that controller and we tryed to use it on the the other station with the same results

[martin]

In the throttle tab is the brake button only on when pressing on the brake or is it blink once in a while

[docdoom]

did not notice it doing anything. don't have the controller so I can't confirm what it was doing. don't have a problem with the stock on in same #2 location.