Messages

1

RCS64 News / Slot it dongle and controller

« on: September 10, 2021, 02:39:37 PM »

Hi, is it possible to use the slot-it dongle and Scott controllers with rcs64?

2

Issues with version 4 / Re: Pace cars having burst of speed.

« on: September 28, 2018, 07:01:05 PM »

Hi thanks for the reply. My pace car recording have been quite complicated, however I have simplified them. I e  constant speed and  setting as little complications as possible. I have also found that my cars speed up. This may be due to fuel usage being applied. I have found that unchecking the recoded time box  has a bearing. Try this out.
Thanks widders

3

Issues with version 4 / Pace cars having burst of speed.

« on: September 27, 2018, 09:00:44 PM »

Hi has any one experienced some pace cars going out of control. It seems to happen with the same cars each time and also coincides with running five or more cars.
Is it a problem with the c7042 apb or is it damage to the incar chip or is it the Rcs64 prog. I am running the prog on a  Windows 7 laptop which is exclusivley used for this purpose.
Any ideas?..
All advice welcome

4

RCSO2 oXigen / Re: Smart sensor

« on: July 29, 2018, 03:59:56 PM »

Hi Martin, do you know what type/ brand of sensor is a mega sensor. Can't seem to find info anywhere.
Many thanks.

5

RCSO2 oXigen / Re: Smart sensor

« on: July 24, 2018, 06:41:15 PM »

Many thanks, do you know what type of sensor is used?

6

RCSO2 oXigen / Smart sensor

« on: July 12, 2018, 02:26:56 PM »

Hi , can anyone tell me the best place to purchase the smart sensor, for scalextric track pit lane.
I believe that the sensors are in two sizes 1.5 or 5 mm. which one should I order?

7

v4 how it works / Re: Incorrect Lap times for small tracks

« on: April 30, 2018, 08:43:10 PM »

I have now increased the size of the track and reset the programme. It now records correct lap times and pace cars can be recorded in one lap. So all is working correctly. :

8

v4 how it works / Re: Debug view?

« on: April 30, 2018, 08:40:06 PM »

Thanks for that. It was helpful.

9

v4 how it works / Debug view?

« on: April 29, 2018, 08:40:00 PM »

Hi can anyone explain the debug view and its uses?
Many thanks.

10

v4 how it works / Re: Incorrect Lap times for small tracks

« on: March 06, 2018, 11:36:45 PM »

Thanks for trying.Much appreciated. If I solve it I will post it.

11

v4 how it works / Re: Incorrect Lap times for small tracks

« on: March 05, 2018, 01:44:01 PM »

Thanks for your reply. The lap time problem also effects the controlled car. This does make for even racing i have also noticed that the skip everty tenth lap setting for pace cars does not seem to work. I am running windows 10 could this be part of the problem.

12

v4 how it works / Re: Incorrect Lap times for small tracks

« on: March 03, 2018, 06:06:55 PM »

Hi, I have tried setting the min lap time to 2 secs. But this has made no difference. I tried re-recording a pace car using ‘ record without using controller’ and this resulted in a one lap record. However I then tried another car and used the same setting. Unfortunately this once again recorded two laps as one. I am scratching my head!

13

v4 how it works / Re: Incorrect Lap times for small tracks

« on: March 02, 2018, 02:06:47 PM »

Hi thanks for your reply. The firmware is updated to 1.09. The S/F is just before the pit lane entrance.
I will reset the min lap time to 2 seconds as you suggest. Thanks for the advice on the smart sensors.
Love this system!

14

v4 how it works / Re: Incorrect Lap times for small tracks

« on: March 01, 2018, 01:03:19 PM »

Thanks for the reply.
My lap times for one lap is 4.3 seconds and for the double lap 8.5 seconds.

just another little item I have not solved. That is getting a pace car to pit and stop. I have worked out how to get it to enter the pit lane but it goes straight through. Are pit sensors essential for this operation. I am using cross overs.

Thank you for your help.

15

v4 how it works / Re: Incorrect Lap times for small tracks

« on: February 28, 2018, 11:51:53 AM »

Hi, I have tried putting in minimum lap times for one lap @ 3 seconds and also 7 seconds for the double lap time. But it still only records a lap of two circuits. Any other ideas? Thanks for your reply.