Messages

1

Issues with version 4 / Re: window10 not seeing com ports

« on: February 12, 2018, 08:06:22 AM »

all fixed I was able to get help and the fix on another forum. just needed to change the com port settings

2

Issues with version 4 / window10 not seeing com ports

« on: February 11, 2018, 09:06:28 AM »

had the lap top wiped clean of xp and windows 10 installed full . reinstalled rsc64 and Im not able to connect to the power base. this all worked before I have the computer cleaned up.  i had this problem before and I  was able to fix by going into the ports on xp and clicking on the correct port.but Im not able to find these in windows 10. need help thanks

3

Issues with version 4 / Re: truespped controler not working

« on: March 23, 2016, 01:39:02 AM »

did not notice it doing anything. don't have the controller so I can't confirm what it was doing. don't have a problem with the stock on in same #2 location.

4

Issues with version 4 / Re: truespped controler not working

« on: March 22, 2016, 07:31:00 PM »

it showed the throttle working. both in cal screen and race screen. but the car would not go. exit out of rsc64 and the car would work. restart rsc64 and it would stop.it just would not see that controller and we tryed to use it on the the other station with the same results

5

Issues with version 4 / Re: truespped controler not working

« on: March 22, 2016, 07:23:20 PM »

then I'm not sure why it would not work. had no problems with the stock scaley ones and he said it works fine with is rsc64 set up...

6

Issues with version 4 / Re: truespped controler not working

« on: March 22, 2016, 04:51:18 PM »

we did that and still was a no go. what was strange is that the other true speed they had worked fine with my setup. also when you went into the  cal mode it would not see the brake and lane change at all. with the one we had problems with. was thinking after they left those true speed have adjustment for brakes and such. do you have to turn them to max before you do a cal?

7

Issues with version 4 / truespped controler not working

« on: March 22, 2016, 04:18:22 AM »

had  few of the draww guys over for racing and could not get one of there true speed controlers to work with rsc64. would not ca; in any of the postions. turn of rsc64 and it would work with the power base.also still having problems with #2 throttle cals. known bug .

8

Issues with version 4 / Re: Poor control of car after new Start Event

« on: October 06, 2015, 10:05:19 PM »

I also have had that happen and found it only happen when the track was damp or wet never when dry. so i just reset weather so its dry at the start of the race. also the cars it did happen to had slicks on and not wet weather tires

9

Issues with version 4 / Re: Problem with Sounds - Error 4810

« on: October 06, 2015, 10:01:05 PM »

need to do a reboot of the computer. i have had that happen a few times and only way I could get any sound to work again was to reboot.

10

Issues with version 4 / Re: analog mode

« on: December 16, 2014, 04:19:27 AM »

Did it Practice and GP. did not try it in Qualifying.

11

Issues with version 4 / Re: analog mode

« on: December 15, 2014, 11:27:20 PM »

rebooted and ran in analog mode ran 20 laps in lane one and then lane two and this is what I found.lane one would add a lap to lane two  when it passed over the start finish line but lane two only counted its lane.

12

Issues with version 4 / Re: analog mode

« on: December 15, 2014, 09:25:01 PM »

min lap time set at 4 sec normal lap time is around 10 for my track. taking power base off and cleaned still a problem. Im thinking maybe lag issue with power base and computer. i do have my legacy set at one. try a re boot and see what happens

13

Issues with version 4 / analog mode

« on: December 15, 2014, 07:51:12 AM »

1st try running in analog mode. notice that the program was counting laps even when the car was not crossing the  sensors. was double and some times trible counting laps. at one point stopped on the back section of the track and watch 10 laps go up an me not move a inch. not a problem in non analog mode. it happened in both lanes. up to date firmware on base.

14

Issues with version 4 / Re: Bug Reporting

« on: December 04, 2014, 02:03:24 AM »

bone stock throttle controls and profiles. all throttle calibration are good also. pace care running on fixed speeds. dont have any sector timing  sensor set up yet. I found that record pace cars Are just to erratic with out them.

15

Issues with version 4 / Re: Bug Reporting

« on: December 02, 2014, 08:48:25 PM »

during practice mode with fixed pace cars running.at end of the event all pace cars will start speeding up to the point that they will start flying of the track.it take a few lap  before you see it happen.not a problem if you catch the end of the practice and shut down the event. need to click on qualify and race tap and see if practice stops on its own or if you have to stop it manually  tested and race and qualifying work coorect