Bug report: Controller calibration not working

[MattiasC]

I guess you might know about this too.

For me the controller calibration doesn't work. Making the calibration everything looks fine. If logging in the real-time graph afterwards everything looks right. Though when starting a race session the green meter to the right indicates that the controller is pressed for full speed even when not touched. Though in reality the car gets fed nothing when not pressing at all, and full spreed when pressing just a little. I.e. full or nothing.

Doesn't matter which controller (1-6) I try to calibrate. I have tried with different physical controllers too.

[martin]

This should work, I think you have miscalibrated the controller!

[MattiasC]

Well, when I calibrate there is the progress bar while not pressing the trigger. Then comes the message telling you to fully press it for 3sec. So I press the trigger, click ok and wait. Now nothing more happens (no finished message, and the Done button is disabled all the time) so the problem might be here. I'm not sure though what I could do differently.

When live monitoring the controller in the graph afterwards everything looks fine. The curve follows the trigger input.

Any suggestions?

[martin]

Have you tried follow this guide:

http://rcs64.notlhosting.com/forum/index.php?topic=70.0

[MattiasC]

Thankyou for that link, It turned out that I started to press the trigger fully before clicking OK on the MessageBox telling you to hold trigger during the calibration. I did it in order to not starting to press too late, but it turned out that when doing so  the calibration process aborts. It gives no message about it though.

Pressing the trigger AFTER clicking OK makes the calibration work though.

[martin]

Glad it sorted you problem.

Martin