How RCS64 works > Requirements for using RCS64

Basic needs to get RCS64 running

(1/2) > >>

martin:
C7042 powerbase
Cable bewteen Powerbase an PC(See www.RCS64.com for purchase)
RCS64 license(F3 or F1, also by www.RCS64.com)

When got all the hardware make sure to upgrade the Power base to firmware 1.09. RCS64 version4 is able to update.

Then just enjoy the softare...

Martin
Team RCS64

Minardi:
I think we need also a link to FTDI-drivers download location.

martin:
In the new version the driver is included.

deb0zz:
If using RCS64 with C7042 and SmartSensor does the PC / Laptop require 2 USB slots one for the SmartSensor and one for the connection to C7042.......probably obvious question but we do not have any hardware yet, just investigating.

Regards
Mark

MrFlippant:
Yes. You'll need a USB port for any extra hardware. If you get a laptop with only one port, or less than you need, then a USB splitter/port expander will work fine. I've got a cheap 4 port thing that most of my cables are connected to. I've got the C7042, C7030, Pit-Pro, Scorpius, and a wireless keyboard mouse all connected at the same time on a laptop with only 3 USB ports. ;-) And I still have a spare port for a USB memory stick.

Navigation

[0] Message Index

[#] Next page