It would be nice to have the option not to have a time delay for the track call. 1 sec just seem like a lot on a smaller track. With human reaction time combined with the CPU processing and one second delay it seems more like a 2 second penalty. I tried to do a half second by entering .5 and a quarter by entering .25, but this setting will not stick and resets anything below 1 to 0 when you boot up RCS64. This is an issue because a 0 in the box causes The track call to activate automatically (is the key word) instantly with the ATC off. The trigger on the controller can be squeezed and the track call still active.