Messages

16

v4 how it works / Re: Database(s) to copy?

« on: December 08, 2014, 07:37:05 PM »

MrFlippant
What du you want to do with the data s?
 I use the ssdc and pc lapcounter data for my own evulation.

17

RCS64 News / Re: How do you know about RCS64?

« on: December 08, 2014, 07:14:16 PM »

to Read in Slotforum, and you know, you has the early edition present on the raceway.

18

General/Off Topic / not use for dump slot racer

« on: December 06, 2014, 06:48:23 PM »

Some word about RCS64.
at first, we are guy's how never want to pass from anyone and fight all time for the fast Lap. So we never ever drive carefully laps whatever position.
Yesterday we make a Event  with weather, fuel use and tire wear.
In Training und Quali with Rain and drying Track. If you have the wrong Tire you have problems. So, for the Race we take Rain out. Only sunny and cloudy. Start with sunny weather Track Temp 27 degrees. After 20 Rounds anybody de slotet, change to soft tire, nothing change, what a fuc... 6 Round later we aborted the Race. If i cancel the Race I see the Track temperature, only 15 degrees. Thats the problem, not the RCS works wrong, all driver not notice that the Grip "was lost".
What a great Work,
The sotware is not use for dump slot racer.
The next Race we take a big big look to the Track temperature. 

Guys keep it up!

19

Future Development / Re: Race statisics

« on: December 04, 2014, 10:24:50 PM »

The files are slightly different. All values are now filled with "value". In the old version, only the value was available. This weekend I'll revise the import filters.

20

Future Development / Re: Race statisics

« on: December 04, 2014, 10:00:34 PM »

OK I found the Files ,
They do not find it with the search in explorer.
I take a look and give you an answer

21

Future Development / Re: Race statisics

« on: December 04, 2014, 09:15:17 PM »

Martin,
I'm sorry but i do not find a Folder "RCS64" or a File "Result" on my PC
It is a Windows XP Version.
What is the Name from the File where you save the Results and at is the last 3 letters "Result:rcs"?

22

Future Development / Re: Race statisics

« on: December 04, 2014, 08:10:31 PM »

Martin,
I only have the old file of Marcel. In the video data has been used from another RCS. Where you save the racing data, I have not found in the new Version!
If you have current files you can send me a mail. I have soon holiday then I can  perform further experiments.

23

Future Development / Re: Race statisics

« on: December 03, 2014, 07:17:18 PM »

Hi MattiasC
The analysis works only after the session. But there you can set a x sec time for deslotings or if you Rest. 

"I think it would be a good tool for evanuating different gearings"
This is like my thought to use more Cars in one session. In the "Requirements for using RCS64" "Switch driver and or cars without the training to interrupt."

24

Future Development / Re: Switch driver and or cars without the training to interrupt.

« on: December 01, 2014, 04:35:48 PM »

hi Martin,
not in a RACE Practice.
This training is a free driving does not belong to a race.
Sometime the fastest lap times was written on a blackboard, then a second fastest lap with a special type (class) has been written to it. Now we often "free ride" where we want to go with each different vehicles (different classes) the fastest lap. Normal must all stop driving then, that we begin a new workout for the fastest lap, with viewed lap time again 0. The problem is that another driver still wants to go with the current vehicle further. Because he had just repairing ect. If we were then each time interrupt training, we could start every 5 minutes.
Similarly, if we are more like 6 driver. Then three people share two ID so that you drive on ID 3, then sometimes ID4. Or if someone does break goes another on this ID. Then you could just change the name without to stop the others driving.
After the free driving then everyone sees his lap times for each vehicle which he has selected.
In another RCS can change the driver without problems, and with my program, I can also have more than 6 riders simultaneously analysis. It does not matter how many ID on you drove, since the evaluation is on the driver and not on ID refers. Unfortunately, the vehicle alternator is not already too. In my analysis, I could use a low expenditure to show also.

I hope my explanation is understandable

Friedhelm

25

Future Development / Switch driver and or cars without the training to interrupt.

« on: December 01, 2014, 09:10:23 AM »

In most cases, we will make long trainings of 60 minutes to 90 minutes.
Since then, each driving can drive as much as he wants with cars he like.
If we have more than 6 riders we often swap places. So it's good if you could change the driver during training in RCS. Similarly, for the cars. If we try to drive fast laps, we change the meantime, the cars, then when the RCS would put the new car, the times to 0 is perfect.

26

Future Development / Re: Race statisics

« on: November 30, 2014, 07:44:23 PM »

A picture is worth a thousand words.
http://youtu.be/-CiNPF6VvZI
It is a Pre Version
Summary for each driver in the fields above
Position in the race for each round as a graph or in a list
Lap times each round as a graph or in a list
Distance to the guide, fuel consumption, tire wear, ect. ect. ect.
Driver and telemetry data individually selected and deselected

27

Future Development / C7030 PB using as PitIn Sensor

« on: November 30, 2014, 06:54:52 PM »

I use the old PB (C7030) as PitIn Sensor.  It would be nice if I can also Use in RCS64

28

RCS64 News / Re: RCS64 Version 4 release

« on: November 29, 2014, 12:06:18 AM »

today first Race, works very good. Difficult if you with out fuel the car lost in one moment the normal power, and if one directly behind it crash. Have nice Race .
Good Work.

29

Requirements for using RCS64 / Re: Re: Basic needs to get RCS64 running

« on: November 25, 2014, 08:43:04 PM »

We test it with Win XP and a old PC. Yes you must deaktivat Sorting dashboards, then the Software works fine.

30

Deutsch - Forum / Re: Scalediggerz senden Hallo aus NRW

« on: November 25, 2014, 08:39:25 PM »

Hallo,
hatte gestern mein Facebook lahm gelegt. Dein Profilbild ist unverkennbar  .
Viel spass beim Fahren